THESE ARE NOT FOR THE PH PITCHER.
If you need the ph pitcher replacement here is the link to them
Seychelle Dual water filter pitcher replacement filter removes chlorine, chemicals, VOC's, pesticides, herbicides, heavy metals like lead, mercury, aluminum. It also reduces 85 to 90% of fluoride and arsenic. and a wide range of other contaminants It does not remove giardia and cryptosporidium so it is designed as a drinking water product to be used with chlorinated municipal water, and as a replacement for bottled water.. The filter cannot filter out sea water (salt water). The filter has a filtering capacity of 150 gallons or 6 months.
You should flush the filter before the first use with the red flushing bulb. You just screw it onto the filter and hold up to your faucet and slowly turn on your faucet until water starts to flow through the filter for a few minutes. This flushes the carbon dust that might be in the filter and also condition the filter for a better flow rate. You can also flush it periodically if the water flow slows way down.
QUESTIONS & ANSWERSAsk a Question
Does this include 2 filters for the pitcher?
Yes, it comes with the filters.
I haven't kept track of how many gallons of water I have used with my filter's how can you tell when it's time to change them?
If you have flushed them and the flow rate has not come back to a good flow or the water starts getting the bad taste back. Normally you change them every 4 to 6 months.
I have: 1-40500-2. PH Gen2 Pitcher replacement filters (2). What is the difference between the 40500 and the 40100...both Gen2?
Both of them will fit your pitcher! The 1-40100-2 Gen 2 pitcher filters remove the same contaminants they just DON'T raise the PH of your water. Where as the 1-40500-2 Dual Alkaline replacement filters will raise the PH plus remove the contaminants ( same as the Regular Gen 2 filters )
I have the two filter model, and the filters filter exremely slow sometimes never. What is the problem
The filters need to be flushed properly ( meaning the flushing bulb needs to fit correctly onto your faucet for flushing ) If it doesn't fit well try using an outside spigot to flush them. You will need to have good pressure for flushing them as well. The media inside the filters need to be completely saturated before they will work correctly. Sometimes it takes a few times flushing and using to get them flowing correctly as well. You may have to flush them periodically throughout the filter life as well.
Will these work in an Alexapure pitcher ?
Yes, they will work in the Alexapure.
What is the difference between replacement GEN2 REG 1-40100-2 and 1-40101-2?
The 1-40101-2 is for the newest pitcher model it comes with 2 filters. The 1-40100-W is for the old-style pitcher it has one large filter.
Will these fit the ph pitcher? I have the ph pitcher, but I am not looking to adjust the ph of my water.
Yes, they will fit the ph pitcher.
Do these filters fit on the smaller pitchers?
Yes, they will fit the smaller pitcher.
Is there 2 in the package?
Yes, there are 2 filters.
When are you supposed to change the filters?
They have a filtering capacity of 200 gallons. Around 3 to 4 months.
I am very happy with this company and the water filters I purchased. Thank you!
Arrived early. Well packaged. This site has the best price on this filter. ( I shopped around).
My Mom bought every family in our family a water pitcher. We use ours constantly but the filters were passing water thru slower and slower. Decided it was time to check into new ones even tho I heard they were costly. Once I was on the site, I was pleasantly surprised prices were decent and my water pitcher is getting full use once again!